Cleaning the LCD TV ... 3 Disclaimer ... 3 Getting Started Package Contents... 4 Fixing ViewSonic LCD TV to the Wall ... 5 Relocating the Satellite Speakers ... 6 Front Display and Controls ... 7 Rear Panel and Connections ... 8 Side Panel Connections...
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or the case of the LCD TV. ViewSonic will not be liable for damages resulting from use of any ammonia or alcohol-based cleaners. ViewSonic...
Important! Save the original box and all packing material for future shipping needs. Package Contents Please check that your LCD TV package includes: LCD TV ViewSonic User’s Guide AC Power Cable Universal Remote Control with Batteries Important! If there are any items missing from this list, please contact your distributor.
(perpendicular to the TV rear panel), and a single screw is mounted on the underside of each supporting upright (parallel to the direction of the supports). Loosen all six screws, and keep for future use. Use only approved wall-mounting brackets advised by ViewSonic or your local distributor. Notes: •...
Speakers ting the Sat To replace the speakers attached to LCD TV or extend the cable please contact ViewSonic or your local distributor for advice. To detach the satellite (side) speakers from the main LCD TV unit, please read the following guidelines: Disconnect the power to LCD TV.
Introducing ViewSonic LCD TV Front Display and Controls Select input sources. INPUT Toggle the OSD menu . MENU Decrease the volume during normal operation or adjust a VOL- highlighted control whilst using the OSD menu. Increase the volume during normal operation or adjust a VOL+ highlighted control whilst using the OSD menu.
Connect the video output from your DVD/VCR player or PC to this VIDEO terminal. Connect this audio output to the left speaker. Audio-L Connect this audio output to the right speaker. Audio-R Connect to a SPDIF device. SPDIF ViewSonic N4200w...
Connect an external video device to this input. Pr/Cr Connect an external video device to this input. Pb/Cb Connect an external video device to this input. Connect to an external antenna or cable service. ANALOG ANT ViewSonic N4200w...
暂停 (FREEZE) 显示 (DISPLAY) 画中画/画外画 (PIP/POP ) 画中画/信号源 (PIP/SOUR) 画中画/位置 (PIP/POS) ViewSonic Select Input Source (e.g. Video, Antenna, PC). Use these buttons to select a channel. Adjust Volume. UP/DOWN for OSD function select and LEFT/ RIGHT for function adjust. Press OK to confirm your selection.
Page 13
画中画/信号源互换(PIP/SWAP) 观赏模式 (WIDE) 休眠 (SLEEP) 菜单 (MENU) 频道 (CH﹀ / CH^) 电源 ViewSonic Toggles between input sources for the Main and Sub pictures. Change Aspect Ratio. Set timer to turn off the Display. Display menu or exit OSD menu. Sequentially scrolls between channels.
Dispose of the battery in accordance with local laws and regulations. Keep the batteries away from children and pets. When the remote control will not be used for extended periods, please remove the batteries. ViewSonic N4200w...
Page 15
Connecting to Audio Output To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port to the appropriate AUDIO IN port on a compatible amplifier. ViewSonic RF Cable or Adapter Audio in Cable (Cable not supplied)
Page 16
Connect video cable to the output jack on the video source, and the composite input on the LCD TV. Now connect the audio cables to the left and right audio-out terminals on the video source to the audio-in terminals. ViewSonic SPDIF Cable (Cable not supplied)
Page 17
Connect video cables to the Y, Pb/Cb, Pr/Cr outputs on the video source, and the Y, Pb/Cb, Pr/Cr inputs on the LCD TV. Now connect the audio cables to the left and right audio-out terminals on the video source to the audio-in terminals. ViewSonic YCbCr / YPbPr Cable (Cable not supplied)
Page 18
Connect the VGA cable from the PC’s VGA-out to the VGA terminal input of N4200w. Select PC screen resolution up to1360 x 768 (1280 x 1024 also supported) according to preference. VGA 15 Pin Cable (Cable not supplied) ViewSonic N4200w...
Page 19
Connect an audio-cable from the audio output (green terminal) of your PC to the audio input terminal (also green) of N4200w. PC Audio Cable (Cable not supplied) HDMI: Connect the HDMI cable from DVI output of PC to the HDMI input of N4200w. HDMI Cable (Cable not supplied) ViewSonic N4200w...
Page 20
AC Switch Switch to ON AC wall socket Powering LCD TV Press the Power button at the bottom of the LCD TV, or press the Power button on the Remote Control. Now switch on the external video player. ViewSonic N4200w...
To view output from a PC, select VGA. Select TV for TV output. Select AV1/AV2 for external video sources. Select S-Video for VCR output. Select HDTV and HDMI for when connecting directly to a DVD player or compatible device. To select the displayed input source, press OK. ViewSonic N4200w...
The four icons at the top of the OSD Main menu represent the four-submenus (Picture, Audio, Setup, and Parental) For TV mode, select TV from the source menu. The four icons at the top of the OSD Main menu represent the four sub-menus (Picture, Audio, Setup, and TV). ViewSonic N4200w...
Red, Green, and Blue color intensities manually. Select Graphic or Text. Text/Graphic Select single or Multi-picture functions. ViewSonic Operation ► Increases the contrast. ◄ Decreases the contrast. ► Brightens the display. ◄ Darkens the display. ► or ◄ Cycles between color schemes.
H. Position main and sub picture in PIP. Adjust the vertical position of the main V. Position and sub picture in PIP. ViewSonic Operation ► Starts Auto Sync. ► Increases the frequency. ◄ Decreases the frequency. ► Increases the phase difference.
Page 25
Bass Adjust the treble. Treble Adjust the left and right audio Balance balance. ViewSonic Operation ► Increases the low-frequency sound. ◄ Decreases the low-frequency sound. ► Increases the high-frequency sound. ◄ Decreases the high-frequency sound. ► Emphasizes the right speaker.
Adjust OSD transparency level. Transparency A timer to automatically switch off the OSD Timer Out OSD display. ViewSonic Operation ► or ◄ Select Wide or Normal. ► Returns setup to factory default settings. ► or ◄ Cycles between the available languages for the OSD menu.
Automatically adjust the image color. Flesh Tone Preset color schemes available are STD, Color Temp Warm and Cold. Select single or Multi-picture functions. ViewSonic Operation ► Increases the contrast. ◄ Decreases the contrast. ► Brightens the display. ◄ Darkens the display.
Page 28
Adjust the bass. Bass Adjust the treble. Treble Adjust the left and right audio balance. Balance ViewSonic Operation ► Increases the low-frequency sound. ◄ Decreases low-frequency sound. ► Increases higher-pitched sound. ◄ Decreases higher-pitched sound. ► Emphasizes the right speaker.
Page 29
Transparency A timer to automatically switch OSD Timer Out off the OSD menu. ViewSonic Operation ► or ◄ Select Single Window / Smart / 16:9 / Zoom / Wide / 4:3. ► or ◄ Select 30 MIN, 60 MIN, 90MIN, 120 MIN, 180 MIN, 210 MIN, 240 MIN.
Page 30
Clear Password Setup the film rating Rating Setup classification To enable Closed Captions. CC Setup ViewSonic Operation ► or ◄ to select on or off. Press ► to select the desired password. Note: 1. There is no default password for the Parental Lock function;...
Preset color schemes available are Color Temp STD, Warm and Cold Select single or Multi-picture functions. ViewSonic Operation ► Increases the contrast. ◄ Decreases the contrast. ► Brightens the display. ◄ Darkens the display. ► Increases the color saturation.
Page 32
Adjust the bass. Bass Adjust the treble. Treble Adjust the left and right audio Balance balance. ViewSonic Operation ► Increases the low-frequency sound. ◄ Decreases low-frequency sound. ► Increases higher-pitched sound. ◄ Decreases higher-pitched sound. ► Emphasizes the right speaker.
Page 33
Adjust OSD’s transparency level. Transparency A timer to automatically switch OSD Timer Out off the OSD menu. ViewSonic Operation ► or ◄ Select Smart / 4:3 / 16:9 / Zoom / Wide. ► or ◄ Select 30 MIN, 60 MIN, 90MIN, 120 MIN, 150 MIN or OFF.
Page 34
Finetune Adjust searching signals. Standard Indicates the present sound effect. Audio Mode ViewSonic Operation The TV will search for all available channels and add them to the channel list. The TV will search for all available channels, and you have to add them to the channel list manually.
Warning: Setting PC a screen-mode that exceeds the 60Hz refresh-rate could permanently damage the LCD TV display. Note: Product specifications are subject to change without notice. ViewSonic 42.02 inch viewable screen 0.681mm (H) x 0.227 (V) mm pixel pitch RGB vertical stripe Anti-Glare RGB analog (0.7/1.0 Vp-p, 75 ohms)
Check the sleep timer is not set. The internal temperature of the unit may have increased. Remove any objects blocking the vents or clean the unit as necessary. Entire Picture Does Not Display Properly Check the screen-mode settings such as picture size correctly configured. ViewSonic N4200w...
Customer Support For technical support or product service, see the table below or contact your reseller. You will need the product serial number. NOTE: Country/ Web site Region China www.viewsonic.com.cn ViewSonic Telephone Email 800 820 3870 service.cn@cn.viewsonic.com N4200w...
How long the warranty is effective: ViewSonic LCD TV’s are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first consumer purchase.