Rear View Of The Product - ViewSonic CDE4802 User Manual

Rear View of the Product

Item
1 HDMI input
2 PC/VGA in & PC Audio in
3 USB
4 RS232 signal input
5 IR Out
6 Earphone Jack
7 Audio input (left/ right)
8 YPbPr signal input
9 SPDIF Optical output
10 DVI-D
Connect to the HDMI output of A/V devices.
Connect to a PC VGA port or a PC line / audio port.
Connect to USB devices, such as USB flash drive.
Reserved for the service technician's use.
Connect to an IR emitter. This will enable the remote control of
external equipment.
Connect to earphones. By connecting the earphones, you can
listen to the sound from the display through the earphones.
If you connect the earphones, the display speakers will be muted.
Connect to the corresponding audio connectors on your A/V
device.
Connect to the YPbPr output of YPbPr device.
Connect to the SPDIF input of A/V device.
Connect to the DVI-D of A/V devices.
5
Description