Chapter 6: Configuring The Printserver Using The Web-Based Utility; Overview - Cisco Linksys WPS54G User Manual

Wireless-G PrintServer
Chapter 6: Configuring the PrintServer Using the
Web-based Utility

Overview

After setting up the PrintServer with the Setup Wizard, the PrintServer will be ready for use. However, if you'd like
to change its settings, use the PrintServer's web-based utility. This chapter will describe each web page of the
utility and each page's key functions. The utility can be accessed via your web browser through the use of a
networked computer.
There are six main tabs: Setup, Protocol, Wireless, Printer, Status, and Exit. Additional tabs will be available after
you click one of the main tabs, except for the Setup tab.
To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the PrintServer's IP
address in the Address field. Then press Enter.
NOTE: Use the PrintServer's IP address that you noted when you ran the Setup Wizard. Otherwise,
insert the Setup CD-ROM, and when the Welcome screen appears, click Setup Wizard. Follow the
instructions until you reach the Wireless-G PrintServer Setup screen. Note the IP address, and then
click Back until you reach the Welcome screen. Click Exit.

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Overview
25