Setup Flow - NEC Express5800/R320a-E4 User Manual

SETUP FLOW

This flow chart illustrates the flow of the setup
procedures for the NEC Express5800/R320a-E4/M4.
Manual Setup
Step 4B Manual Setup
Create [OEM-Disk] *1
Set OS (Windows) CD/DVD-ROM
Install driver in [OEM-Disk]
Start the OS installation
Apply [Update the system]
Install ft Server Control Software and
NEC ESMPRO Agent
: Entered or selected by the user
: Proceeds automatically
*1 Windows Server 2008 does not
require OEM-Disk.
Step 1 Start the OS reinstallation setup procedure
Step 2 Prepare the OS reinstallation setup
Step 3 Disable OS Boot Monitoring Function
Prepare for OS (Windows) installation and ft Server
Control Software installation
Step 5 Connect and Configure Options
Step 6 Update Software
Step 7 Service Pack Installation
Step 8 Set Duplex LAN Configuration
Step 9 Set Dual Disk Configuration
Step 10 Create Volume
Step 11 Set Network for NEC ESMPRO
Step 12 Enable OS Boot Monitoring
Step 13 Make Settings for Failure
Step 14 Back up System Information
Completion
Express Setup
Step 4A Express Setup
Set [NEC EXPRESSBUILDER] DVD
Specify the size of the partition for OS installation
Set OS (Windows) CD/DVD-ROM
Automatic installation of following software:
OS (Windows)
ft Server Control Software
NEC ESMPRO Agent
Windows Setup 4-3