3. Battery charging instruction ......................7 4. Tag Cleaning Instructions ......................7 5. Battery Status Indicator ........................ 8 6. Buttons ............................9 7. Tag off Mode ..........................10 CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
Page 3
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
Page 4
Issue date: 30 Sep 2016 Declaration Cadi Scientific Pte Ltd reserves the right to change the product described in this Operator’s Manual. All information contained in this Operator’s Manual is subject to change without notice. CADI SmartSense – SmartTag STG-821 User Manual...
CONFIDENTIAL 1. Introduction The STG-821 is a battery rechargeable personnel tag. The STG-821 transmits LF signal continuously to trigger close proximity communication between tags. Leveraging on this unique tag-to-tag proximity detection technology, the STG-821 can also be configured for contact tracing applications to help organizations accurately track, trace and monitor personnel, including staff, visitors and patients, coming into proximity contact with each other.
Interfaces 2 x buttons 2 x Bi-Colour LEDs ( Red and Green) 1 x Buzzer. Sensors Accelerometer Sensor Compliance EN 60950 EN 300220 EN 300330 EN 301489 CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
2. Dry the tag with a clean cloth. Caution: The tag cannot withstand for autoclave sterilization. It may cause tag damage. Caution: The tag is not water-proof; do not immerse the tag into water. CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
GREEN LED with single beep only if it is normal. 3. If the battery strength is too low, the tag might keep restarting and output beeping sound. CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
2. Duress signal will be triggered if the button is pressed and hold until a beep sound generated. (approximately 3 seconds) 3. Unauthorized Exit alert neutralization signal will be triggered once the button is pressed. CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...
Charge the tag 1. The tag can be turn-off by following the steps as described above. 2. Once the tag is off, the tag only can be turn-on by charging the tag. CADI SmartSense – SmartTag STG-821 User Manual T-STG-821-I02-A01...