Table of Contents
Advertisement
[ eco OPERATION INDICATOR LAMP ] /DOOR ALARM/LOCKING THE CONTROL PANEL
● Always confi gure the settings with all the doors closed.
Caution
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
Notice
● If [ " eco " Operation indicator lamp] isn ' t illuminated, check the following things.
・ Is the [ " eco " Operation indicator lamp] set as Off? → Perform the above-mentioned procedure for how to return.
・ Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the
compressor operates at a high speed and this indicator lamp is not lit. → Open/close the door quickly or minimize
the number of opening/closing the door.
・ When the refrigerator is operated with FRE EZER , REF RIGERATOR or QUIC K enabled, → It will be illuminated after
the quick cooling functions fi nish and the operation of the refrigerator gets stable.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [ " eco " Operation indicator lamp] is illuminated.
[ " eco " operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■ How to turn off the
indicator lamp
Touch and hold the
button for three seconds with
all the doors closed until the
[ " eco " Operation indicator
lamp] blinks.
The [ " eco " Operation
indicator lamp] is unlit.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
Duration when door is open
30 seconds ※
1 minute
2 minutes
3 minutes
■ When you want to stop the alarm
Touch and hold the
button for three seconds
with all the doors closed until
one beep sounds.
When the setting has been
completed, the indicator
lamp is restored to the
original state.
Notice
● When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
● The Door Alarm is enabled when shipped.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting where the
Door Alarm sounds.
When this indicator lamp
This can prevent erroneous operation of the Control Panel or misuse by children.
■ Locking
Touch and hold
the
button for
approximately three
seconds until one
beep sounds.
is lit to indicate
that the lock has been
completed.
Notice
● Electric pulling-out operation will not be stopped even if the Lock function on the panel for operation is set as On.
To disable the AUTO DOOR function, unlock the Control Panel and then press and hold the
58
seconds or more until two beeps sound.
[ " eco " Operation indicator lamp]
The indicator
lamp blinks
3 seconds
Touch this button and hold it for 3 seconds
Alarm sound
3 long beeps
3 long beeps
5 long beeps
It keeps continuously sounding.
The Door Alarm can be stopped.
Indicator
lamp is ON
3 seconds
Touch this button and hold it for 3 seconds
Locking the Control Panel
(Lock on the panel for operation) is illuminated, any other button will not be actuated by touching it.
Indicator
lamp is ON
3 seconds
Touch this button and hold it for 3 seconds
Pg.48
Pg.38
[ eco Operation indicator lamp]
■ How to restore the setting
Touch and hold the
for three seconds with all the doors
About
closed until the [ " eco " Operation
indicator lamp] becomes lit.
The [ " eco " Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
Door Alarm
※ From 30 seconds onwards, the Door Alarm sounds
Control Panel
only when the energy saving mode is set.
Does not blink
The Refrigerator Compartment, Ice Compartment,
Flashing
Lower Freezer and Vegetable Compartment have the
Flashing
Door Alarm function (but the Upper Freezer doesn t).
Flashing
■ When you want to sound the alarm again
Touch and hold the
button for three seconds
with all the doors closed until
two beeps sound.
About
When the setting has been
completed, the indicator
lamp is restored to the
original state.
■ Unlocking
Touch and hold
the
button for
approximately three
seconds until two
About
beeps sound.
is lit to indicate
that the lock has been
released.
Indicator
lamp is ON
button
Touch this button and hold it for 3 seconds
Indicator
lamp is ON
Touch this button and hold it for 3 seconds
Indicator
lamp is OFF
Touch this button and hold it for 3 seconds
button for three
About
3 seconds
About
3 seconds
About
3 seconds
Advertisement
Table of Contents
