Call Setup - Philips CTS660PUP/40 Manual

Call Setup

Call ID
With the support of the network you can select
Network, Hide ID Send ID
or
identity to your correspondent.
Call Waiting
This option is used to
waiting. When this option is active, you hear a beep if
someone tries to call you while already on a call. If this
option is inactive, your phone will not inform you and
the one tries to call you will hear the busy tone or the
call will be diverted to another phone (needs to set
Divert If Busy). Select Query Status
of this option.
Call Divert
To divert incoming calls to your mailbox or to a
number (whether in your contacts or not).
Divert All
Will divert all the incoming calls. If you
Voice Calls
select this option, you will not receive
any calls until you deactivate it.
Divert If Busy
Divert when you are on a call.
Divert If No
Divert when you do not answer the
Answer
call.
Settings
Set By
to show or hide your
Activate Deactivate
or call
to find out the status
Divert If
Divert when your phone is switched
Unreachable
off or out of service area.
Divert All
Divert all data call.
Data Calls
Cancel All
Cancel all divert options.
Divert
Activate
Select and enter the number. Select
Status
to find out the status of corresponding diverting
options.
Before activating this option, you must enter your
voice mailbox number. This feature is subscription
dependent.
Call Barring
Allows you to limit the use of your phone to specific
calls. This can be applied to
International Calls International Except
or
Incoming Calls (All Calls
or
Cancel All
the option applies to all calls at once.
Barring PW
is used to change the call barring password.
Query Status
allows you to know whether a type of call
is barred or not.
This feature is network dependent and requires a
specific call barring passowrd supplied by your service
provider.
Outgoing Calls (All
Home) and/or to
When Roaming). In both cases,
Change
Query
Calls,
25