Advertisement
5019k/154669/im
5/17/02
2:16 PM
INSPECTING THE BIT
Since use of a dull bit will degrade efficiency and cause possible motor mal-
function, sharpen or replace the bit as soon as abrasion is noted.
INSPECTING THE MOUNTING SCREWS
Regularly inspect all mounting screws and ensure that they are properly
tightened. Should any of the screws be loose, retighten them immediately.
Failure to do so could result in serious hazard.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and replacement) should be per-
formed by authorized service centers or other qualified service organiza-
tions, always using identical replacement parts.
Cleaning & Lubrication
Use only mild soap and damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
Self-lubricating bearings are used in the tool and periodic relubrication is not
required. In the unlikely event that service is ever needed, take your tool to
an authorized service location.
Accessories
Recommended accessories for use with your tool are available from your
local dealer or authorized service center. If you need assistance regarding
accessories, please call
1-800-9-BD TOOL
WARNING: The use of any accessory not recommended for use with this
tool could be hazardous.
Page 4
One Year Free MaIntenance
All B&D tools for Industry and Construction are covered under a one year
free maintenance program where B&D will inspect your tool for safety and
provide necessary maintenance or repairs, including normal wear and tear
parts, for one year, FREE OF CHARGE.
Full Warranty
All B&D tools for Industry and Construction are warranted to be free of any
defects in materials or workmanship. Upon thorough examination of tool,
B&D will repair or replace, at our option, any product that is determined to be
defective.
Conditions
The service/safety check and the warranty do not apply to: repairs made or
attempted by anyone other than an authorized B&D service location; misuse,
abuse, neglect, improper application of the tool; missing parts; or normal wear
and tear (after first year of ownership). Please return the complete unit, trans-
portation prepaid, to any B&D factory owned or B&D authorized service center
location (list provided with tool or see Yellow Pages under "Tools Electric").
(1-800-923-8665)
4
Every B&D tool is of the highest quality.
If you wish to contact us regarding this product, please call toll
free between 8:00am and 8:00pm ET, seven days a week:
1-800-9-BD TOOL
(1-800-923-8665)
Advertisement
