Time-Setting Options; Set The Timer; Setting The Cooking Time; Setting A Later End Time - Siemens HB36D 75 Series Instruction Manual

The cooking time has elapsed
A signal sounds. The appliance stops heating.
appears in the display.
Press the button to stop the signal.
0
Changing the temperature
You can change the temperature at any time using the rotary
selector.

Time-setting options

The time-setting options are called up with the
following functions are available:
When the appliance is switched off:
Setting the timer
■
Setting the clock
■
When the appliance is switched on:
Setting the timer
■

Setting the cooking time

■

Setting a later end time

■
Setting time-setting options - in brief
Press the button.
0
1.
Press the or button to switch to the required time-setting
¾ ¿
2.
option.
Set the required time or cooking time using the rotary
3.
selector.
Exit the time-setting options with the
4.

Set the timer

The timer runs independently of the cooking mode. You can
use it like a kitchen timer and set it at any time.
Press the 0 button.
1.
Set the timer duration using the rotary selector.
2.
Exit the time-setting options with the
3.
The display switches to its previous state. The
the timer appears, and the time can be seen counting down.
Changing the timer duration
Press the 0 button. In the next few seconds, change the timer
duration using the rotary selector. Exit the time-setting options
with the button.
0
Once the timer duration has elapsed
A signal sounds. "0:00" appears in the display. Press the
Q
button to stop the signal.
Cancelling the timer duration
Press the button. Turn the timer back to "0:00" using the
0
rotary selector. Exit the time-setting options with the
Setting the cooking time
If you set a cooking time for your dish, cooking stops
automatically once this time has elapsed. The appliance stops
heating.
For types of heating involving steam, you must always set a
cooking time.
Example in the picture: Setting a cooking time of 45 minutes.
Requirement: The type of heating and temperature have been
set.
12
"0:00"
x
0 button. The
0 button.
button.
0
Q symbol for
0
0 button.
Changing the cooking time
Press the button. Switch to the cooking time using the
0
button. Change the duration using the rotary selector. Exit the
time-setting options using the
Checking information
Press the button.
±
For more information, press the
Press the 0 button.
1.
  7\SHV RI KHDWLQJ
7LPHU
 âPLQ VHF
Switch to the cooking time using the
2.
Set the cooking time using the rotary selector.
3.
  7\SHV RI KHDWLQJ
7LPHU
 âPLQ VHF
Exit the time-setting options with the
4.
If the operation has not yet started, press the Start button.
5.
The x cooking time counts down on the display.
For the Steam type of heating, the cooking time starts
counting down after the heating-up time.
Changing the cooking time
Press the button. Switch to the cooking time using the
0
button and change the cooking time using the rotary selector.
Exit the time-setting options with the
The cooking time has elapsed
A signal sounds. The appliance stops heating. The
time "0:00" appears in the display. Press the
the signal.
Cancelling the cooking time
Press the 0 button. Switch to the cooking time using the
button and set it to 0:00 with the rotary selector. Exit the time-
setting options with the 0
Setting a later end time
You can change the time at which you wish your dish to be
ready. The appliance starts automatically and is ready at the
desired time. You can, for example, put your dish in the
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
For the Steam type of heating, the cooking time starts counting
down after the heating-up time. The selected end time is
delayed by the length of the heating-up time.
Example in the picture: It is 9:30, the dish takes 45 minutes to
cook, but is not to be ready until 12:45.
Requirement: The cooking operation which was set has not
started. A cooking time is set. The
open.
0 button.
button again.
±
&RRNLQJ WLPH
 âPLQ VHF
button.
¿
&RRNLQJ WLPH
 âPLQ VHF
0 button.
button.
0
x
0 button to stop
button.
time-setting options are
0
¿
 
¿
cooking
¿