Breville the BrevillePrecision Brewer Thermal Instruction Book page 13

Hide thumbs Also See for the BrevillePrecision Brewer Thermal:
Table of Contents

Advertisement

Available languages

Available languages

8. Rotate the SELECT dial to the desired
mode. Press the START|CANCEL button.
The machine will display the progress:
• The machine will remind you to insert
either cup or carafe where applicable
• Heating: the heating system is being
pre-heated to the optimal temperature
• Blooming: the bloom phase of
preparation is in progress
• Brewing: brew water at the correct/
selected temperature is being
delivered to the ground coffee
9. When your coffee is ready, the machine will
beep 3 times. The machine will display the
"Time since brewed".
NOTE
A small amount of water remains in the
tank after brewing. This is part of the
normal operation.
NOTE
Never fill the water tank once the coffee
machine has started a brewing cycle.
BREW MODES
• FAST: This mode is to deliver the fastest
brewed coffee. This coffee machine is one
of the fastest 12 cup (60oz) brewers.
• GOLD (recommended): This mode has
been certified by the SCA (Specialty Coffee
Association) to meet their rigorous technical
requirements using the cone filter basket.
• STRONG: This brewing mode delivers a
stronger tasting coffee.
• MY BREW: Allows you to customize every
brew setting.
BDC450_455_USC_IB_I20_FA.indd 13
• Bloom Time: Coffee bloom occurs when
hot water hits the ground coffee. This
setting allows you to adjust how long the
bloom time lasts. We recommend 30-60
seconds. During this time the brewing cycle
pauses to allow coffee to naturally bloom.
See 'TIPS' for more about Bloom Time.
• Brewing Temp: You can adjust the
temperature of the brew water being
delivered to the ground coffee to suit
your favorite coffee. See "TIPS" for more
about setting brew water temperature.
• Flow Rate: You can adjust brewing time
to control contact time by adjusting the
water delivery speed. Choose between
Slow, Medium, and Fast (default).
• Pour Over: If you are using the Pour
Over Adapter, this must be turned on.
(Included in BDC455 only. Sold separately
at Breville webpage).
• OVER ICE: This is to make stronger coffee
for ice coffee.
• Fill the water tank with the amount
of water you want to brew up to 20oz
line and start brewing. After brewing,
pour over ice. See 'TIPS' for details.
• COLD BREW: Cold Brew coffee is brewed
differently to traditional coffee. It uses cold,
not hot water. Your brewer uses the "Full
Immersion" method of brewing cold brew
which steeps the water and coffee together
over an extended duration – typically
between 4 - 14 hours. This method creates an
intense smooth coffee with little bitterness.
Brew ratios are also different, and much
higher than normal. Breville recommends
a brew ratio 2-3 times higher than average,
approximately 3 Breville scoops to every 5oz
of water.
• See 'TIPS' for step-by-step guide
of brewing Cold Brew.
• Brew time is adjustable.
NOTE
OVER ICE mode and COLD BREW mode will
be disabled if there is more than 20oz of water
in the tank.
13
24/1/20 9:48 am

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdc450Bdc455

Table of Contents