Table of Contents
Advertisement
OSD Unlocked:
•
In normal display condition to press the "Navi Key" in the middle of more than 3
seconds to trigger "OSD Unlock".
•
The "OSD Unlock" message will be displayed in the middle of the screen.
•
LED lights will be restored to blue light.
System
Picture
Input
Color
Auto Source
Wide Mode
Audio
Hot Key Assignment
Performance
DDC/CI
OSD
HDMI Black Level
System
Quick Start Mode
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1, HDMI2, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6.
DP Format: Default is DP1.2, can selection support DP1.1 or DP1.2 format.
7.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
8.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Blue Light, Over Drive).
9.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
10. HDMI Black level: Select to set HDMI black level.
11. Quick start mode: Select Off or On. Turn on to speed up boot speed.
Mode - Standard
HDMI1
On
Full
On
Normal
Off
X
Advertisement
Table of Contents
