Table of Contents
Advertisement
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Night mode]: Select quiet or full dynamic
•
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
•
[HDMI audio]: Set an HDMI audio format
when this player is connected through
HDMI.
[Digital audio]: Select an audio format
•
for the sound output when this player is
connected through a digital connector
(coaxial).
[PCM downsampling]: Set the sampling
•
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
Network (installation,
status...)
1
Press .
2
Select [Setup] > [Network] to access the
network setup options.
[Network installation]: Start a wired or
•
wireless installation to make the network
work.
[View network settings]: Display the
•
current network status.
•
[View wireless settings]: Display the
current Wi-Fi status.
[Name your Product:]: Re-name this
•
player for identification in a home network.
[Miracast break-in]: Turn on or off
•
Miracast.
[Miracast browser]: Scan for Miracast
•
devices.
[Miracast role]: Force this player to be
•
Group Owner or automatically choose a
device to be Group Owner.
• [Auto]: The role of Group owner is
automatically determined between the
source device and this player when
connection is established.
• [Group owner]: Force this player to
be Group Owner and allow it to select
the channel to use for establishing the
link with the source device.
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
[Menu language]: Select an onscreen
•
display menu language.
[Audio]: Select an audio language for video.
•
[Subtitle]: Select a subtitle language for
•
video.
[Disc menu]: Select a menu language for a
•
video disc.
[Parental control]: Restrict access to discs
•
that are encoded with ratings. Input "0000"
to access the restriction options. To play all
discs irrespective of the rating, select level
"8".
[Screen saver]: Enable or disable screen
•
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity (for
example, in pause or stop mode).
EN
9
Advertisement
Table of Contents
