Advertisement
The power-on light (
»
•
To switch it off, slide the On/Off switch to
4 Let the appliance heat up for at least 60 seconds.
When the curling iron has heated up, the ready to use indicator
»
( ) on the barrel changes color from lila (cool barrel) to pink
(hot barrel).
5 Comb your hair and divide your hair into small sections.
6 Move the support backwards.
7 Press the lever ( ) and place a section of hair between the barrel ( )
and clip ( ).
8 Release the lever and slide the barrel to the hair tip.
9 Hold the cool tip ( ) and the handle ( ) of the curling iron, and
then wind the section of hair round the barrel from tip to root.
10 Hold the curling iron in the position for max. 10 seconds, and then
unwind the section of hair until you can open the clip again with the
lever.
Note: Do not pull at the curler when you unwind the section,
otherwise you would straighten the curl.
11 To curl the rest of your hair, repeat steps 7 to 10.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and curling tong by damp cloth.
4 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop ( ), or store it in the pouch supplied.
3
Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you find
its phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
) goes on.
.
Advertisement
