Table of Contents
Advertisement
Gear ratio:
1.86 (26/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F175AET M/T
F200FET M/T
F200FET1 M/T
FL200FET ML/TL
FL200FET1 ML/TL
Fuel and oil:
Recommended fuel:
F175AET Regular unleaded gasoline
F200FET Premium unleaded gasoline
F200FET1 Premium unleaded gasoline
FL200FET Premium unleaded gasoline
FL200FET1 Premium unleaded gasoline
Min. research octane number (RON):
F175AET 90
F200FET 94
F200FET1 94
FL200FET 94
FL200FET1 94
Recommended engine oil:
YAMALUBE 4 or 4-stroke outboard
motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
4.3 L (4.55 US qt, 3.78 Imp.qt)
Engine oil quantity (with oil filter
replacement):
4.5 L (4.76 US qt, 3.96 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
YAMALUBE outboard gear oil or Hypoid
gear oil
Specifications and requirements
Tightening torque:
Noise and vibration level:
EMU33555
EMU33565
Boat horsepower rating
EWM01561
Overpowering a boat can cause severe in-
stability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boats
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.
EMU40491
Mounting outboard motor
EWM02501
Improper mounting of the outboard mo-
Because the outboard motor is very
Recommended gear oil grade:
SAE 90 API GL-4 / SAE 80W API GL-5 /
SAE 90 API GL-5
Gear oil quantity:
0.980 L (1.036 US qt, 0.862 Imp.qt)
Spark plug:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Propeller nut:
54 Nm (5.51 kgf-m, 39.8 ft-lb)
Engine oil drain bolt:
27 Nm (2.75 kgf-m, 19.9 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
Operator sound pressure level (ICOMIA
39/94):
80.8 dB(A)
Installation requirements
WARNING
WARNING
tor could result in hazardous conditions
such as poor handling, loss of control,
or fire hazards.
heavy, special equipment and training is
required to mount it safely.
11
Advertisement
Table of Contents
