Controls; Cookware Tips - GE JP626 Use And Care Manual

Your surface units and controls are designed to give
you an infinite choice of heat settings for surface unit
cooking.
At both OFF and HI the control "clicks" into position.
How to Set the Controls
2. Turn the knob to the desired heat setting.
Cooking Guide for Using Heat Settings
HI—Quick start for cooking; bring water to a boil.
Medium High—Fast fry, pan broil; maintain fast boil
on large amount of food.
MED—Saute and brown; maintain slow boil on large
amount of food.
Medium Low—Cook after starting at HI; cook with
little water in covered pan.
LO—Maintain serving temperature of most foods.
NOTE:
• At HI and Medium High, never leave food
unattended. Boilovers cause smoking; greasy
spillovers may catch on fire.
• At LO, melt chocolate, butter on a small unit.
Cookware
Use medium- or heavy-weight cookware. Aluminum
cookware conducts heat faster than other metals.
Cast-iron and coated cast-iron cookware are slow to
absorb heat, but generally cook evenly at low to
medium heat settings. Steel pans may cook unevenly
if not combined with other metals.
For best cooking results pans should be flat on the
bottom. Match the size of the saucepan to the size of
the surface unit. The pan should not extend over the
edge of the surface unit more than 1 inch.
6

CONTROLS

1. Grasp the control knob
and push it in.

COOKWARE TIPS

When cooking in a quiet kitchen, you may hear slight
"clicking" sounds—an indication that the heat settings
you selected are being maintained.
Switching to higher heat settings always results in a
quicker heat change than switching to lower settings.
The control must be pushed in to set only from
the OFF position. When the control is in any
position other than OFF, it may be rotated without
pushing it in.
Be sure you turn the control knob to OFF when you
finish cooking.
An indicator light will glow when a surface unit is on.
Medium
High
Right
Not over 1 inch
Medium
Low
Wrong
Over 1 inch