Hitachi P50X901/DW3-D Service Manual

SERVICE MANUAL
This ADDENDUM is made due to the new models P50X901 (DW3D), P50V701 (DW3D) and P50S601 (DW3F).
They are different to models P50H401 (DW3A), P50T501 (DW3A) and P50H4011 (DW3A). The Main difference is the panel,
the X/V/S models use "AF1" Plasma Panel and the H/T Models use "AE1" Plasma Panel. Software (Digital Main PWB) is also
different because of Plasma Panel difference.
Refer to Service Manual PA0224 when servicing X/V/S models in regards to other adjustments not covered in this addendum.
This ADDENDUM indicates only the differences and special considerations to be taken when servicing the X/V/S models.
SPECIFICATIONS ................................................................................................... 2
ADJUSTMENTS (See below for Power Supply Adjustment Info.) ........................... 4
BLOCK DIAGRAMS ................................................................................................. 5
DIGITAL MODULE BLOCK DIAGRAM .................................................................... 6-A
CONNECTOR DIAGRAMS ...................................................................................... 7
FINAL WIRING DIAGRAM ....................................................................................... 9
QUICK DISASSEMBLY GUIDE ............................................................................... 11
CIRCUIT SCHEMATIC DIAGRAMS ........................................................................ 13~27
PARTS LIST ............................................................................................................ 28
PANEL PWBs ......................................................................................................... 29
PANEL CONNECTORS PART NUMBERS ............................................................ 30
REMOTE CONTROL "HOW TO ENTER SERVICE MENU" DW-1, 2 AND 3 ......... 31
IN DEPTH 55 INCH PANEL (50AF1) TROUBLESHOOTING FLOW CHARTS ...... 32
REPLACING THE POWER SUPPLY INFORMATION and ADJUSTMENTS ......... 48
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
CAUTION:
Electric shock do not perform any servicing other than that contained in the operating instructions
Unless you are qualified to do so. Before servicing this chassis, it is important that the service
Technician read the "IMPORTANT SAFETY INSTRUCTIONS" in this service manual.
Components having special safety characteristics are identified by a ! on the schematics and on the parts list in this
Service Data and its supplements and bulletins. Before servicing the chassis, it is important that the service technician
Read and follow the "Important Safety Instructions" in this Service Manual.
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
Version 0226-6
Updated 02-09-08
MAY 2007
TO GO TO A CHAPTER, CLICK ON ITS HEADING BELOW
CONTENTS
SAFETY NOTICE
USE ISOLATION TRANSFORMER WHEN SERVICING
PLASMA DISPLAY PANEL
PA No. 0226
P50X901 / DW3-D
P50V701 / DW3-D
P50S601 / DW3-F
R/C: CLU-4372A p/n HL02402
R/C: CLU-4374A p/n HL02404
R/C: CLU-4373A p/n HL02403
HHEA-MANUFACTURING DIVISION
P50X901
P50V701
P50S601