Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for E-Image EJ-160
Summary of Contents for E-Image EJ-160
- Page 1 Fresnel Studio LED Light EJ-160 SUPPORT YOUR IMAGE...
-
Page 2: Table Of Contents
Cautions: Contents Thanks for purchasing E-IMAGE products. We encourage you to read this manual carefully to familiarize all the details features before operation, some of which maybe new to you. The manual including all safety Cautions instructions, operation, maintance. Please make sure that all equipments is operated correctly to avoid any defects or damage. -
Page 3: Introduction
The product conforms to the international standard DMX512 agreement completely, the device can be controlled In single, and also be controlled in many units. EJ-160 Size: 241mm In The Box: Fresnel LED Light... -
Page 4: Technical Data
Technical Data: EJ-160: Model EJ-160 Power supply AC100V-240V,50Hz/60Hz Power consumption 150W Lamp COB Led 100W, white Luminous flux 10000lm-12000lm Lifetime of led More than 50000hours Color temperature 3200k or 5600k ≥85Ra or ≥95Ra Dimmer 0-100% linear dimmer Beam angle 15°-55°... -
Page 5: Installation Of Barndoor
Installation Of Barndoor: Installation : Take out the barndoor,operation followed by the overview. 2.Dmx512 connection: Please use xlr-xlr wires connect the dmx output of the controller with the dmx input of the first device, and connect the dmx output of the first device with the dmx input of the second device, always connect one output with the input of the next device until all devices are connected. -
Page 6: Installation
Installation : Installation : 1.Description of the keys: 4.Zoom: Shown in the figure, loosen the handle, to move it forward or backward to get needed spot size, then tighten the handle . Display 5.Dimmer: This equipment is dimming is 0-100% linear dimming, which can be adjusted through 2.Basic setting: DMX512 signal, in the absence of DMX signal can be adjusted through the device The display will show address and other information when the unit is powered on. - Page 7 Installation : Installation : Demo: To run the built-in perform program. Manual dimmer: Adjusting the brightness of the light,level 000-255 means lighting from dark to brightest. Press "ENTER" key to enter main menu,it will show message [Perform] , press "ENTER" key to confirm, usen "D0WN"...
-
Page 8: Appendix
Installation : APPENDIX Problem and solution Display adjusting: Adjusting the length of LCD display. It can be turned off automatically after 5s, 10s, 30s, 60s or continuous on. Problem Reason Resolution Press "ENTER" key to enter main menu,it will show message [Display] , press "ENTER"...