Adjusting The Contrast; Adjusting The Brightness; Setting Up Personal Picture Mode; Picture Ad. (Advanced) Menu - Philips 32PF1700T/96 Installation And Operation Manual

32PF1700T_96_Tuner-RC-EN.book Page 19 Thursday, April 26, 2007 5:35 PM

Adjusting the contrast

1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the
details in the bright areas of the image can be seen clearly. Do not further
decrease the contrast level to avoid losing the saturation of colors.

Adjusting the brightness

1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.

Setting up Personal Picture mode

You can adjust the settings in the PICTURE menu and save them as your
Personal Picture Mode. You can press 影像模式 (Picture Mode) on the
remote control to select these modes directly.
1. Press 目錄 (Menu) to display the OSD menu on-screen.
2. Press
PICTURE menu.
3. Press
Personal.
4. Press
and then press
5. Press 目錄 (Menu) to save the settings and close the OSD menu.
PICTURE AD.
(ADVANCED) menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference
only.
Item Function
Adjusts the image noise reduction function that helps to remove
Noise Reduction
noise in images.
Adjusts the auto contrast enhancement function that optimizes the
Black Level
image contrast ratio.
Adjusts backlight intensity.
Backlight Level
Sets up the NTSC video display format to match that of the input
NTSC video input from other devices (such as a DVD player).
NTSC Setup
or to select PICTURE, and then press
or to select Picture Mode, and then press
or to select Contrast, Brightness, Colour, Sharpness..., etc.,
or to adjust the settings to your satisfaction.
This option is only available for NTSC video sources.
to enter the
or
PICTURE PICTURE AD. AUDIO PREFERENCE TV SETTING
Noise Reduction
Black Level
Backlight Level
NTSC Setup
Left/Right: Select main page.
OK/Down: Enter sub menu.
On-Screen Display (OSD) menu
to select
Low...
Low...
Bright...
7.5 IRE
19