Select Your Tv In Pc Mode; Use Your Tv As A Pc Monitor - Philips 19PFL3403/98 User Manual

Timer
NR
Skin tone
To lock program
Auto lock
After your personal access code has been set, you
Source list
are ready to select the channels or inputs you want
to block out or censor.
1. Press MENU on the remote control and select
Features > Auto lock > Lock program.
Main control
Features
Timer
NR
Skin tone
Auto lock
Source list
2. Press Æ to enter.
3. Use the number buttons to enter the channel
which you are going to block or press Î or ï to
block the current channel.
4. Press MENU to exit.
Note
D
1. You can block additional channels by using the
number buttons to jump to another channel.
2. Remember that 0000 is the default auto lock
code. If your access code has been changed by
someone other than you (a child, for example)
or you have forgotten the code, you can always
get in by inputting the default code.
EN-18
Access code
Auto lock
Lock program
Change code
Clear all
6.11

Use your TV as a PC monitor

Using a VGA cable connects a PC to your TV as a PC
monitor.
Caution
B
Before you connect your PC, set the PC monitor
refresh rate to 60Hz.
6.11.1. Supported screen resolutions
The following screen resolutions are supported in
PC mode:
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz, 56Hz
1024 x 768 60Hz
1280 x 768 60Hz
1440 x 900 60Hz, 75Hz
1400 x 900 is recommended resolution.
E
6.12

Select your TV in PC mode

1. Press MENU on the remote control and select
Features > Source list.
2. Select PC and press OK to confirm your choice.
3. If necessary, adjust the picture settings as
described in Change picture settings section.
4. Press MENU to exit.
Tip
E
Set the picture format to Full screen or 4:3 in PC
mode.