Honeywell H52WCSC User Manual page 16

2.7 Reversing the Door Swing — Longitudinal Handle
01 Remove the shaft hole cap and the sleeve of the upper part of the glass door
assembly. Remove the screws, the door light switch block, the door stopper and
screws, and the sleeve of the lower part of the assembly.
02 Rotate the door assembly 180 degrees, exchange the position of the upper sleeve
and the shaft plug, then move the foor stopper and the lower sleeve from the lower
right to the lower left.
Door
Stopper
Light
Switch
Lower
Block
Sleeve
14