Yamaha 195S 2021 Owner's/Operator's Manual page 97

(3) Slide anchor light stoppers A and B apart
to disconnect them.
1 Anchor light stopper A
2 Anchor light stopper B
(4) Extend the anchor light pole, and then
screw anchor light stopper A onto the
center section of the pole.
1 Anchor light stopper A
2
1
1
Equipment operation
(5) Open the cap of the anchor light socket,
fit the protrusion on the anchor light into
the slot in the socket, and then install the
light into the socket.
1
1 Cap
2 Slot
3 Protrusion
(6) Fit anchor light stopper B into the anchor
light socket.
1 Anchor light stopper
To store the anchor light:
(1) Pull anchor light stopper B upward, re-
move the anchor light, and then close the
cap of the anchor light socket.
(2) Unscrew anchor light stopper A from the
center section of the anchor light pole,
and then fold the pole.
3
2
1
89