Side Panel L, Lithium Ion Battery Connector (Xp3); Lithium Ion Battery - Sony GTK-XB60 Service Manual

Note: Follow the disassembly procedure in the numerical order given.
2-2.

SIDE PANEL L, LITHIUM ION BATTERY CONNECTOR (XP3)

MAIN board
rear side
Note: When removing the rubber, insert a
sharp-tipped object such as tweezers
into the cutout.
tweezers, etc.
rubber
– –
2-3.

LITHIUM ION BATTERY

right side
boss
rear side
3 Remove the lithium ion battery block
in the direction of the arrow.
5 two cushions (battery)
Note 1: This parts cannot be reused.
When replacing the lithium ion battery,
be sure to replace them with new parts
simultaneously.
front side
7 lithium ion
battery
connector
(XP3)
left side
rear side
5 Remove the side panel L
in the direction of the arrow.
top side
front side
boss
2 battery cover
Note 2: When installing the battery cover,
align the two bosses and two holes.
top side
front side
2 screw
(M3
3 three screws
(M4 20)
two bosses
(with two rubbers)
6 side panel L
w t i t the th ee hi
cushion (battery cable)
Wrap the cushion
(battery cable) around.
10 mm
guide line
cushion (battery)
bottom side
– Right view –
6 lithium ion battery
hole
hole
1 four screws
(M4
GTK-XB60
4 five claws
1 two rubbers
(See Fig. A)
4 four
2 two screws
claws
(M3 10)
10)
two bosses
(with two
rubbers)
4 four
3 two screws
(M4 20)
1 two rubbers
(See Fig. A)
top side
Wrap the cushion
(battery cable) around.
lithium ion battery
cushion (battery)
guide line
4 cushion
(battery cable)
Note 1: This parts cannot be reused.
When replacing the lithium
ion battery, be sure to replace
them with new parts
simultaneously.
left side
20)
claws
7