Panasonic NC-A701 Operating Instructions Manual page 6

How to use
3
Attach the bean container securely.
Attach the bean container lid to the bean container, adjust the grind adjusting knob
●
to the position and press the recessed part of the bean container against the raised
top of the main unit until it is secure.
When the coffee bean mode is selected, open the bean container lid and place the
●
appropriate amount of coffee beans into the bean container, then close the bean
container lid.
When you take out the bean container with unused coffee beans, there will be residual
●
coffee beans on the grinding tray. It is necessary to clean the bean residue before
putting the grinding tray into the bean container. Otherwise, the beans may be crushed
and fall into the crevices of the grinding tray when the bean container is installed.
Please make sure that the grinding tray is installed before installing the bean container.
●
Reference table for the amount of coffee beans and ground coffee to be used
(Approx. 120 mL for one cup. You can adjust the amount of coffee beans and powder according to your personal preference.)
Number of cups of drip coffee Flat scoop of coffee beans (approx.) Flat scoop of ground coffee (approx.)
2 cups
4 cups
6 cups
Note
How to remove the grinding tray (Remove the bean container before removing the grinding
●
tray).
Before removing the grinding tray, please use up the bean residue first. Otherwise, the bean
●
residue will spill out when the grinding tray is lifted.
<Disassemly>
<Disassembly>
Hold the grinding tray handle and turn it towards the
●
grinding tray to remove the grinding tray from the bean grinding cavity.
<Assembly>
Hold the handle of grinding tray and align position
●
on the bean grinding cavity. Assemble the grinding tray into the bean grinding cavity
and turn the grinding tray clockwise in the
EN10
When the ground coffee mode is selected
Add the appropriate amount of ground
coffee into the filter of the coffee
basket rack.
After putting in the ground coffee,
Note
make sure to close the coffee
basket rack to prevent liquid from
escaping during operation.
2.5 ( 19 g ) 2.5
3.5 ( 30 g ) 4
5.5 ( 45 g )
6
<Assembly>
direction on the
on the grinding tray with position
direction until a "click" sound is heard.
4
Assemble the coffee jug properly on the
warming plate.
Note If it is not positioned correctly or not positioned
at all, the liquid may drip directly onto the
warming plate and cause stains or burns.
<Assembly>
Place the coffee jug in the direction of the arrow
●
① , making sure that it is aligned with the
recess of the warming plate.
<Disassembly>
Remove the coffee jug by pulling it out in the
●
direction of the arrow ② .
5
Fill the water tank with the appropriate
amount of water for the number of cups
of coffee to be brewed, and then close the
water tank lid.
The water tank is graduated to 2, 4 and 6,
●
corresponding to the number of cups of coffee.
Please select the amount of water to be added
according to your needs.
You can add water directly to the water tank, or
●
you can disassemble it to add water before
reassembling it.
Note
The amount of water added to the water tank is a one-off brewing amount. Please make
●
sure to add water according to the number of cups to be brewed to avoid affecting the
taste of the coffee.
Do not fill with more water than the water tank scale 6. Otherwise, water may spill out of the
●
tank overflow (back of the tank).
<Assembly>
Align the recessed part of the back
●
of the water tank with the raised
part of the main unit and assemble
it on the main unit in the direction
of the arrow ② .
<Disassembly>
Remove the water tank from the
●
main unit by holding the recess on
the front of the tank and pulling it
out in the direction of the arrow ① .
Water
tank
scale
EN11