Linksys PAP2 Instructions For Setting Up page 3

STEP 4 Prepare your device to work with the Go2Call network
A.
Open your configuration page. To do so, type the following into your web browser:
http://aaa.bbb.ccc.ddd/admin/advanced where "aaa.bbb.ccc.ddd" represents the IP address of your PAP2.
B. On the configuration page click on "Admin Login" and then "switch to advanced view"
C. Click on the "Line 1" tab link. You will see a configuration as pictured in the screen shot below. Fill in the highlighted fields
according to one of the configuration options given on pages 5, 6 and 7. Please do not disturb the non-highlighted
default values given on the configuration screen.
Configuration screen shot continued on page 4.
Copyright © 1999-2006 Go2Call.com, Inc. and/or its suppliers. All rights reserved. "Go2Call" and all associated logos are trademarks, registered as applicable, of Go2Call.com, Inc., and may not be reproduced without Go2Call's permission. Other product
and company names herein may be the trademarks of their owners. This document is provided "as-is" by Go2Call.com, Inc. for the user's internal and non-commercial use. Go2Call.com, Inc. does not promise that the information herein is accurate or
complete and all use of such information is solely at the user's risk. All warranties disclaimed.
Linksys PAP2 Manual Configuration
Fill in the higlighted fields
according to one of the tables on
pages 5 and 6.
page 3 of 7