Table of Contents
Advertisement
Tuning
Tuning
Selecting the station.
Selecting the station.
1
1
Select tuner source
Select tuner source
Press the [SRC] button.
Press the [SRC] button.
Select the "TUNER" display.
Select the "TUNER" display.
2
2
Select the band
Select the band
Press the [FM] or [AM] button.
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
FM1, FM2, and FM3 bands.
3
3
Tune up or down band
Tune up or down band
Press the [4] or [¢] button.
Press the [4] or [¢] button.
• During reception of stereo stations the "ST" indicator is ON.
• During reception of stereo stations the "ST" indicator is ON.
• The sound will be temporarily muted while the faceplate is
• The sound will be temporarily muted while the faceplate is
opening.
opening.
Direct Access Tuning (Function of remote)
Direct Access Tuning (Function of remote)
Entering the frequency and tuning.
Entering the frequency and tuning.
1
1
Select the band
Select the band
Press the [FM] or [AM] button.
Press the [FM] or [AM] button.
2
2
Enter Direct Access Tuning mode
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
"– – – –" is displayed.
3
3
Enter the frequency
Enter the frequency
Press the number buttons on the remote.
Press the number buttons on the remote.
Example:
Example:
Desired frequency
Desired frequency
92.1 MHz (FM)
92.1 MHz (FM)
810 kHz (AM)
810 kHz (AM)
Canceling Direct Access Tuning
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Press the [DIRECT] button on the remote.
Station Preset Memory
Station Preset Memory
Putting the station in the memory.
Putting the station in the memory.
1
1
Select the band
Select the band
Press the [FM] or [AM] button.
Press the [FM] or [AM] button.
2
2
Select the frequency to put in the memory
Select the frequency to put in the memory
Press the [4] or [¢] button.
Press the [4] or [¢] button.
3
3
Put the frequency in the memory
Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
— [#6] button.
— 23 —
— 23 —
Press button
Press button
[#0], [#9], [#2], [#1]
[#0], [#9], [#2], [#1]
[#0], [#8], [#1], [#0]
[#0], [#8], [#1], [#0]
Advertisement
Table of Contents
