14.6
Checking the tire condition
Warning
Danger of accidents If a tire bursts while riding, the vehicle becomes uncontrollable.
–
Ensure that damaged or worn tires are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
Warning
Danger of crashing Different tire tread patterns on the front and rear wheel impair the handling char-
acteristic.
Different tire tread patterns can make the vehicle significantly more difficult to control.
–
Make sure that only tires with a similar tire tread pattern are fitted to the front and rear wheel.
Warning
Danger of accidents Non-approved or non-recommended tires and wheels impact the handling
characteristic.
–
Only use tires/wheels approved by Husqvarna Motorcycles with the corresponding speed index.
Warning
Danger of accidents New tires have reduced road grip.
The contact surface on new tires is not yet roughened.
–
Run in new tires with moderate riding at alternating angles.
Running-in phase
Info
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of
the motorcycle.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
200 km (124 mi)
–
Check the front and rear tires for cuts, embedded objects,
and other damage.
»
If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
–
Check tread depth.
Info
Observe the minimum profile depth required by
national law.
400602-10
Minimum tread depth
»
If the tread depth is less than the minimum tread depth:
–
Change the tires.
WHEELS, TIRES 14
≥ 2 mm (≥ 0.08 in)
85