Sony HDV HVR-1500 Operating Instructions Manual page 80

VIDEO CONTROL [Video]: Settings related to video
control
SETUP REMOVE [> Setup rmv]: Determine whether or not
to remove black setup (7.5 IRE) from input analog video
signals when converting them into digital signals.
SETUP ADD [> Setup add]: Determine whether or not to add
black setup to analog video output signals.
CC(F1) BLANK [> CC1 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 1st
field of the output video signal.
CC(F2) BLANK [> CC2 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 2nd
field of the output video signal.
WIDE MODE [> Wide mode]: Determine whether to retain
wide-screen aspect ratio information accompanying video
being recorded or played back.
ESR MODE [> ESR mode]: Select whether to enable the
edge subcarrier reducer (ESR).
SD PROCESS CONTROL
[> SD Process]
80
Menu Contents
C PHASE MODE [>> C Phas
MD]: Select the phase
rotation mode for chroma
phase control.
The effect of this setting
applies to the output
levels of all of the
composite video, S-video,
SDI and component
video signals.
ADJ RANGE [>> Adj range]:
Select the variable range
of the VIDEO and
CHROMA gains.
VIDEO GAIN [>> V gain]:
Adjust the video output
level.
CHROMA GAIN [>> C gain]:
Adjust the chroma output
level.
CHROMA PHASE [>> C
phase]: Adjust the
chroma phase.
SETUP LEVEL [>> Setup
lev]: Adjust the black
setup level.
Description of settings
*OFF [>> OFF]: Do not remove black setup.
ON (REMOVE) [>> ON]: Remove black setup.
Note
Displayed only when the system frequency is set to 60i.
*OFF [>> OFF]: Do not add black setup.
ON (ADD) [>> ON]: Add black setup.
Note
Displayed only when the system frequency is set to 60i.
*OFF [>> OFF]: Do not suppress.
ON [>> ON]: Suppress.
Note
Displayed only when the system frequency is set to 60i.
*OFF [>> OFF]: Do not suppress.
ON [>> ON]: Suppress.
Note
Displayed only when the system frequency is set to 60i.
*AUTO [>> Auto]: When video being recorded or played back
is accompanied by wide-screen aspect ratio information,
retain the information.
OFF [>> OFF]: Ignore wide-screen aspect ratio information.
ON [>> ON]: Whenever recording or playing back video, retain
wide-screen aspect ratio information.
*OFF [>> OFF]: Do not enable.
ON [>> ON]: Enable.
When playing back a composite signal, set this to ON.
*U/V (COMPOSITE) [>>> Cmpst]: Select this setting when
observing the composite video output level using a
composite vectorscope.
PB/PR (COMPONENT) [>>> Cmpnt]: Select this setting when
observing the component video output level using a
component vectorscope.
*–3 to +3 (dB) [>>> –3/+3]: –3 dB to +3 dB
WIDE [>>> wide]: –∞ to +3 dB
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: *200H
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: *200H
00 [>>> 00] to FF [>>> FF]
Factory default setting: *80H
000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: *200H