Table of Contents
Advertisement
DISC REMOVAL METHOD AT NO POWER SUPPLY
1.
Insert a fine rod (wire etc.) into the hole of the Front Cabinet as shown by the arrow. (Refer to Fig. 1)
The Tray is opened.
2.
Draw the Tray.
TAPE REMOVAL METHOD AT NO POWER SUPPLY
1.
Remove the Top Cabinet, Front Cabinet and DVD Block. (Refer to item 1 of the
DISASSEMBLY INSTRUCTIONS.)
2.
Remove one screw of the Loading Motor from the insert hole for screw driver and remove the Loading
Motor.
3.
Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
4.
Rotate the Clutch Ass'y either of the derections to wind the Video Tape in the Cassette Case.
5.
Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
Insert hole for screw driver
Fig. 1
PARENTAL CONTROL - RATING LEVEL
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below.
1.
Turn Unit ON.
2.
Press and hold the '7' key on the remote control unit.
3.
Simultaneously press and hold the 'STOP' key on the front panel.
4.
Hold both keys for more than 2 seconds.
5.
The On Screen Display message 'PASSWORD UNLOCK' will appear.
6.
The 4 digit password has now been cleared
NB: No indications on the screen when the Parental Lock is setting.
DVD Flap
Fig. 1
Pinch Roller Cam
4 DIGIT PASSWORD CANCELLATION
A1-2
Front Cabinet
Loading Motor
Screw
Main Cam
Main Chassis (Front Side)
Fig. 2
Capstan DD Unit
Clutch Ass'y
Advertisement
Table of Contents
