AEG HC 5590 Instruction Manual page 31

Overview of the Components
1 Lock for angle setting
2 Display, backlit (blue, red, green)
3 "+" button for temperature setting
4 "-" button for temperature setting
5 On / off switch
Before Initial Use
may be a slight smell. You should therefore operate the
Adjust Heating Plate Angle
For ergonomic use of the device by right-handed and left-
handed persons, the heating plates can be swiveled up to
30° to the left and the right.
1. Lift the setting ring on the lock for the angle adjustment (1)
and turn it 90° counterclockwise.
2. Swivel the heating plate 15° or 30° to the left or the right.
Use the angles printed on the side for orientation.
adjustment 90° clockwise and press the setting ring down
again.
4. Set the angle of the other heating plate as described in
steps 1 to 3.
Commissioning
1. Fully unwind the mains cable.
2. Insert the plug in a duly installed socket.
3. Press and hold the On / Off button (5) for 3 seconds to
switch the device on.
NOTE:
140°C.
4. Select a temperature between 140°C and 200°C:
by 10°C each time.
ture by 10°C each time.
NOTE:
the temperature.
up or cooling down.
NOTE:
perature is reached.
General Use
it is taut.
5 seconds, we recommend that you ensure that the hair is
positioned correctly. Always begin at the base of the hair
and move the device in the direction of the hair tip.
Ionizing function with tourmaline coating –
Reduction of electrically-charged hair
The anti-static effect allows easier hair styling. The hair does
not dry out, it becomes smooth and sparkling.
Switch-off
switch the device off.
device on its side.
Safety Switch-Off
This device features a safety switch-off. In case you forget to
60 minutes after the last time a button was pressed.
Cleaning and care
WARNING:
socket.
device in water for cleaning purposes. Otherwise this
might result in an electric shock or ire.
-
CAUTION:
ditional cleaning agents.
English
31
-
-