Power Supply And Output Relay Module - ABB SPAM 150 C User Manual And Technical Description

Technical data
(modified 2002-04)
10
Energizing inputs
Phase and neutral current inputs,
terminals
Rated current I
n
Thermal withstand capability
- continuously
- for 1 s
Dynamic current withstand, half-wave value
Input impedance
Phase current monitoring range
Neutral current monitoring range
Rated frequency f
n
Output contact ratings
Trip contact and restart enable contact
Contact type *)
Terminals
- Rated voltage
- Carry continuously
- Make and carry for 0.5 s
- Make and carry for 3.0 s
- Breaking capacity for dc, when the control
circuit time-constant L/R ≤ 40 ms,
at 48 / 110 / 220 V dc
Breaking capacity for ac
Signalling contacts
Terminals
- Rated voltage
- Rated current
- Make and carry for 0.5 s
- Make and carry for 3.0 s
- Breaking capacity for dc, when the control
circuit time-constant L/R ≤ 40 ms,
at 48 / 110 / 220 V dc control circuit voltage
External control inputs
Blocking, remote reset or remote setting input
External control voltage level
Typical control current of input circuit

Power supply and output relay module

Supply and relay module, type SPTU 240R2/ - R3
Supply and relay module, type SPTU 48R2/ - R3
Power consumption under quiescent/operating
conditions
Note!
*) The trip contact 65-66 has different contact ratings depending on whether it is a normally open
contact (SPTU 240R2 or SPTU 48R2) or a normally closed contact (SPTU 240R3 or SPTU
48R3).
1-2, 4-5, 7-8, 25-26
5 A
20 A
500 A
1250 A
< 20 mΩ
0...63 x I
n
0...210 % I
n
50 Hz / 60 Hz
NO (normally open)
65-66, 74-75
250 V dc/ac
5 A
30 A
15 A
5 A / 3 A / 1 A
5 A
70-71-72, 68-69, 77-78, 80-81
250 V dc/ac
5 A
10 A
8 A
1 A / 0.25 A / 0.15 A
10-11
18...265 V dc or 80...265 V ac
2...20 mA
80...265 V dc/ac
18...80 V dc
~4 W/ ~6 W
1-3, 4-6, 7-9, 25-27
1 A
4 A
100 A
250 A
< 100 mΩ
NC (normally closed)
65-66
250 V dc/ac
5 A
10 A
8 A
1 A / 0.25 A / 0.15 A
5 A