Table of Contents
Advertisement
6. Registry of Libraries
In this chapter, registries which are used by the libraries of System and SIPanel are described. The I/O
Startup Library does not use any registry.
6.1 System Library
The System Library uses the following registries. The values of each registry are automatically updated by
dedicated API functions. User is required not to edit the values.
Localmachine\HARDWARE\DEVICEMAP\AlarmWakeUp
Set up "enable" or "disable" of the power ON by alram.
Table 6.1
Key name
Satus
LocalMachine\HARDWARE\DEVICEMAP\powerONEvent
Set up "enable" or "disable" of the power ON event notification".
Table 6.2
Key name
Status
6.2 SIPanel Library
The SIPanel Library uses the following registries. User is required to edit the values of each registry.
LocalMachine\Software\Apps\SIPmanager
Specify a program to start up the SIPanel when the SIP button is pushed by operator.
Table 6.3
Key name
SIPExeName
SIPQuitOpt
SIPNormOpt
Note:
If you wish to disable the SIP button, delete "SipExeName". If you create your own startup program for the
SIPanel using this library, do not forget to delete or change "SIPExeName". Refer to Chapter 4.2 "Use of
SIPanel Library".
Form
Value
DWORD
0
1
Form
Value
DWORD
0
1
Form
Value
SZ
(file name)
SZ
(character string of
option)
SZ
(character string of
option)
42
Description
Disable the power ON by alarm.
Enable the power ON by alarm. (default)
Description
Disable the power ON event notification.
Enable the power ON event notification.
Description
Specify a file name of program which is started up
when the SIP button is pushed.
Default is "SIPanel.exe".
Specify a character string of quit option which is
attached to the program specified by "SIPExeName".
Default is "/Q".
Specify startup option of the program specified by
"SIPExeName".
Default is not available.
Advertisement
Table of Contents
