Toner Cartridge Replacement - Sharp AR-168D Operation Manual

Reversing tray
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the roller.
"RETURN X ORIGINAL(S) START TO RESUME" will appear in the
Note
display. Return the indicated number of pages to the document feeder
tray. Open and close the SPF/RSPF to clear the error indicator, and
then return the required number of originals. Press the [START] key
(

TONER CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TONER CARTRIDGE IS
NEAR EMPTY." will appear in the display to alert you to purchase a new toner
cartridge. on purchasing a new toner cartridge. If copying is continued while the
indicator is lit, copies will gradually become lighter until the toner runs out. When the
toner runs out, the machine will stop operating, the error indicator will blink, and
"REPLACE THE TONER CARTRIDGE" will appear in the display. Follow the
procedure below to replace the toner cartridge.
• After the machine stops, it may be possible to make a few more
Note
copies by taking the
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the
• During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
TROUBLESHOOTING AND MAINTENANCE
) to resume copying.
toner
toner
) to resume copying.
cartridge out of the machine, shaking it
cartridge.
8
83