Record Your Video - Pioneer PRV-LX10 Quick Start Manual

RECORD YOUR VIDEO

REC
Press the ÒRECÓ (Record) Button located on the front panel (see diagram),
the ÒRECÓ Button will start to flash and you can now start to playback
your video from the source device if you have not done so already. Once
you have completed your required playback, press the ÒSTOPÓ button to
end the capturing of video into the PRV-LX10. Repeat this procedure until
all required video is captured. Each recording session encodes as a Title.
PLEASE NOTE: If the Composite Out function is set to ÒDecoder OutÓ
within the Setup-Operation Menu, the video may take 4secs to appear,
further information on this can be found in the user manual on page 32.
10