Piano Setting Button; Using The Pitch Bend Wheel - Casio 575E1A User Manual

Basic Operations

PIANO SETTING Button

Pressing this button changes the setup of the digital piano to
optimize it for piano play.
Settings
Tone Number: "000"
Rhythm Number: "140"
Accompaniment Mode: Normal
Layer: Off
Split: Off
Auto Harmonize: Off
Transpose: 0
Touch Response:
Off: Returns to initial default
On: No change
Soft/sostenuto pedal jack setting: Soft
Local Control: On
Mixer Channel 1 Parameter Setup: Depends on tone
To optimize digital piano settings for
piano play
1
Press the PIANO SETTING button.
2
Now try playing something on the keyboard.
• The notes you play will sound with a piano tone.
• If you want to play with rhythm accompaniment,
press the START/STOP button. This causes a rhythm
that is optimized for piano will start to play.
• To stop rhythm play, press the START/STOP button
again.
NOTE
• Pressing the PIANO SETTING button while a rhythm is
playing stops rhythm play and then changes the digital
piano setup.
• Pressing the PIANO SETTING button while the digital
piano is in the Synthesizer Mode or other mode exits
the current mode and then changes the digital piano
setup.
• The setup of the digital piano does not change if you
press the PIANO SETTING button when any one of the
following exists.
* During real-time recording, step recording, or while
using the editing function of the Song Memory
* While the data save or overwrite message is on the
display
* During demo tune play
E-20

Using the PITCH BEND Wheel

As its name suggests, the PITCH BEND wheel lets you "bend"
the pitch of a sound. This makes it possible to add a touch of
realism to saxophone and other tones.
To use the PITCH BEND wheel
1
While holding down a keyboard key with your right
hand, use your left hand to rotate the PITCH BEND
wheel up and down.
• Releasing the PITCH BEND wheel returns the note
to its original pitch.
NOTE
• With saxophone and electrical guitar tones, the most
realistic sounding effects can be produced if you play
notes and operate the PITCH BEND wheel
simultaneously.
• See "Pitch Bend Range (Initial Default: 12)" on page
E-71 for changing the bend range of the PITCH BEND
wheel.
• Never turn on digital piano power while the PITCH BEND
wheel is rotated.