D-Link M32 Manual page 33

Section 3 - Configuration
Select Auto Configuration (SLAAC/DHCPv6) if your ISP assigns your IPv6
address when your router requests one from the ISP's server. Some ISPs
require you to adjust these settings before your router can connect to the IPv6
Internet.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable prefix delegation services.
LAN IPv6 Link- Displays Mesh Point A's LAN link-local address.
Local Address:
If Enable DHCP-PD is disabled, these additional parameters are available for configuration:
LAN IPv6 Address:
Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Displays Mesh Point A's LAN link-local address.
Local Address:
D-Link M32 User Manual
Auto Configuration (SLAAC/DHCPv6)
29