Xe Lamp Logbook Data Resetting - Hitachi PRIMAIDE 1440 Instruction Manual

3.3.2 Xe lamp logbook data resetting

(4) The following display will be presented.
<Logbook selecting screen>
LOGBOOK (REPORT=1, RESET=2)
1
Select Report.
Press numeric key 1 and then the ENT key.
(5) On the logbook report screen, the total on period of the Xe
lamp and its standard lifetime (in parentheses under Xe
LAMP), the number of switching-on times and the date of
the last lamp change will be indicated.
<Logbook report screen>
Xe LAMP SWITCHING
123h (500) 23 times
Press the ENT or ESC key.
(6) Logbook display is now completed and the 1
screen returns.
Total on period of the Xe lamp, the number of switching-on times
and the date of the last lamp change are reset.
GLP
(1) Press the
(2) The following display will be presented.
<GLP initial screen>
GLP (LOGBOOK=1, KEY LOCK=2,
1 WL CHECK=3, Xe CHECK=4)
Select LOGBOOK.
Press numeric key 1 and then the ENT key.
3 - 18
LAST CHANGED DATE
9/ 1/2010
key.
st
monitor