Page 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. CAUTION THIS DVD VIDEO PLAYER IS A CLASS1 LASER PRODUCT. USE OF CONTROLS ORADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSESPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE。D D O NOTOFEN COVERS AND DO NOT REPAIR YOUSELF.
Page 3
8. Do not allow anything to rest on the power cord. Do not locate this DVD player where persons will walk on the cord. 9. If an extension cord is used with this DVD player, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating.
Compatible with Video CD, CD, Super VCD, and CVD as well as DVD-video This DVD player can playback not only the Video CD, CD, and DVD-video but also the super VCD and CVD, which are popular in China. In addition, it also can playback the MP3 audio recorded in CD-ROM.
Precautions Please read the followings carefully so that this DVD player can be used correctly and safely. Power supply Make sure that the correct power outlet is used (AC100~240V) Power cord Do not put any heavy objects on top of the power cord to avoid fires or current leaks caused by the cord damage.
Page 7
Disc usage Please hold all discs by their edges or the center opening as shown below. Do not touch the shiny signal surface of the discs. Do not stick labels or tapes on the discs, and do not scratch or damage the discs. The unit spins the disc at high speed during playback.
DVD and VCD: Discs with both images and sounds, including multiple sounds Ø CD-DA: Disks with audio only. Ø Please do not insert DVD-ROM, CD-ROM or Photo CD in this DVD player to avoid some playback problems. Ø This unit complies with VCD ver. 1.1, ver. 2.0, and ver. 3.0. Ø...
Front panel/Display window Front panel Headphone volume level control Adjust the volume level of the headphone Headphone jack Connect the headphone Display window Display the operation information Disc tray OPEN/CLOSE button Open/close the disc tray STILL button Go into “Step” playback mode POWER button Turn on/off the unit STANDBY indicator...
Display window 1. CD/VCD indicator 2. PBC indicator for VCD disc 3. DVD indicator 4. Operation status indicator - playback 5. Operation status indicator – pause or stop 6. Title number indicator 7. Chapter/track number indicator 8. Elapsed playback time / remaining playback time indicator 9.
+/- marks inside the battery compartment. Please point the remote control unit at the remote sensor of the DVD player unit during remote control operation. Notes on the remote control unit Do not use different types of batteries together, or mix old and new ones.
Page 12
POWER Turn on/off the DVD player unit button SETUP Customize the settings. Refer to p. 12 button DISPLAY Display the operation status button OPEN/CLOSE Open or close disc tray button SEARCH Title search, chapter search, and time search. Refer to p.
REAR PANEL AND CONNECTIONS Rear panel There are the following AV output terminals in the rear panel Video output terminals including ü 0ne Y/Cb/Cr Component-video terminal Œ ü One S-video terminal • ü One composite video terminal. Ž Audio output terminals including ü...
Video Connection Y/Cb/Cr component video output terminal can be connected to the TV set equipped with a component video input terminal for the best possible picture quality Œ. Whenever the component video output terminal is equipped for display, please set the VIDEO OUT setting to Y/CR/CB in the initial setting (Refer to p.
SCART OUT SCREEN SAVER GENERAL SETUP There are seven items in the general setup, which are TV Display This DVD player provides three TV video modes : Angle Mark During playback of a title with multi-angle section, the message " screen.
SCREEN SAVER SET VIDEO OUTPUT TYPE SCART Out This DVD player has only one SCART terminal but supports three different types of video output from this terminal. They are composite video, RGB video, and S-video, which are dedicated by setting SCART OUT at "COMPOSITE", "RGB", and "S-VIDEO", respectively.
Screen Saver When this DVD player is idle such as stop, stay at setup menu, or no disc inserted, the screen saver can be triggered to prolong the TV life-time. --GENERAL PAGE— TV DISPLAY ANGLE MARK OSD LANGUAGE AUDIO OUTPUT...
96KHz”. There is no converting process. Preferences Here, you can set the default audio/subtitle/disc language, and the parental level for a DVD disc. This setting is only available when the DVD player is in the STOP mode by pressing the button twice. STOP -- PREFERENCES PAGE –...
Audio This unit supports five audio selections, as shown below, for your preferred default audio. -- PREFERENCES PAGE – AUDIO >> ENGLISH SUBTITLE FRENCH DISC MENU SPANISH PARENTAL CHINESE PASSWORD JAPANESE DEFAULTS 3MAIN PAGE PREFERRED AUDIO LANGUAGE Subtitle This unit supports five subtitle selections, as shown below, for your preferred default subtitle.
PASSWORD CHANGE PAGE OLD PASSWORD NEW PASSWORD CONFIRM PASSOWRD PLASE ENTER OLD PASSWORD Defaults When you select “RESET’ , all the initial setting will be reset to the default setting. -- PREFERENCESPAGE – AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULTS RESET 3MAIN PAGE LOAD FACTORY SETTINGS...
ON-SCREEN DISPLAY (OSD) DVD OSD modes Whenever the button is pressed, the OSD DISPLAY mode changes among the following modes: Mode 1 Only the status of pressed button and some special playback messages are displayed. The OSD message lasts only three seconds. For example, when the button is pressed, the OSD message OPEN/CLOSE becomes...
BASIC OPERATION Preparation: If you use a television set, turn on its power and set the TV/Video switch to “Video”. If a sound system is used, the amplifier must be turned on first and make sure that its outputs are set properly.
Slow-motion forward/reverse playback Press the button can trigger the slow-motion SLOW forward/reverse playback. Whenever the SLOW slow-motion playback is triggered and the speed changes in circles of fwd 1/2Õ fwd 1/4 Õ fwd 1/8Õ rev 1/2 Õ rev 1/4 Õ rev 1/8 Õ normalÕ fwd 1/2. button is pressed, the Whenever the button is pressed, the...
Advanced Operation Repeated playback Whenever the button is pressed, the repeated 1/ALL playback is triggered and the message OSD is changed in circles of “ 1”, “ ALL”, and “ “ 1” ü Trigger the repeated playback of a chapter for a DVD disc.
PREV operation. MARK This DVD player supports 5 memory points for you to store markers. Store makers Press the button during playback and the mark MARK menu will be shown on screen.
Title Menu (DVD only) Some of DVD discs has a title menu recorded on it used to select title for playback. The operation details for the title menu depends on the disc. Press the button during playback to title TITLE menu.
Changing subtitle during playback During playback of a DVD disc with more than two subtitle languages, you can change the subtitle or disable the subtitle by press the SUBTITLE Press the button and the subtitle OSD SUBTITLE message will appear to show the current subtitle number.
VCD’ s playback control (PBC) This function is only available for the playback of a Video-CD Ver. 2.0 or more. The PBC operation may be different disc. Therefore, explanations in each disc package. MENU/PBC button Press the button to switch on/off the PBC MENU/PBC function, while the OSD messages “PBC ON”...
TROUBLESHOOTING Before requesting service for this unit, please check the following chart for a possible cause of the problem you are experiencing. Some simple checks or minor adjustment on your AV system may eliminate the problem and resume proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
SPECIFICATION Power requirement Power consumption Weight Dimensions (W x D x H) Operating temperature range Operating humidity range Video system Component video terminal S-video terminal Video terminal RGB video (SCART terminal) Audio parameters Label First class laser product Danger: when the internal functions are out of order or damaged, opening the cover may cause unseen radioactivity.
This DVD player is designed and manufactured to respond to the Region Management Information recorded on a DVD disc. If the region number described on the DVD disc does not correspond to the region number of this DVD player, this DVD player will not playback this disc, while the OSD message “WRONG REGION”...