Table of Contents
Advertisement
Fault
Washing is not spun
sufficiently, excess wa-
ter is still visible in the
drum.
E20
Error code
ap-
.
pears
The RINSE (SPOE-
LEN, RINCAGE)
indicator flashes.
The door does not open
while the appliance is
switched on.
Possible Cause
There is a kink in the outlet
hose.
The maximum pump height
(outlet hose height 1m from
from the support surface of
the appliance) has been
exceeded.
The detergent solution pump
is clogged.
At the syphon coupling:
The syphon is clogged.
The door is locked due to
high water level or high
temperature.
Instructions for use
Remedy
Straighten the hose.
Call Customer Service, who
have modification kits avail-
able as accessories for pump
heights over 1m.
Switch off the appliance and
pull out the mains plug.
Clean the syphon.
Wait till the programme has
finished, and the END
(EINDE, FIN) indicator light is
on.
However, if you still need to
open the door:
Set the programme selector
to OFF (UIT, ARRET); Turn the
programme selector to PUMP
OUT (POMPEN, VIDANGE).
Press the START/PAUSE
(START/PAUZE, MARCHE/
PAUSE) button.
When the water has been
pumped out, the door can be
opened.
33
Hide quick links:
Advertisement
Table of Contents
