Table of Contents
Advertisement
Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Power On
Power On/Off
Disable
• With "Power On/Off", the camera turns off when you press [
mode or [
] (PLAY) in the PLAY mode.
p
• Change this setting to anything besides "Disable" before connecting to a TV for
image viewing.
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 109,
118). With this setting, the computer sees the camera as an
Mass
external storage device. Use this setting for normal transfer of
Storage
images from the camera to a computer (using the bundled Photo
Loader with HOT ALBUM application).
Select this setting when connecting to a printer that supports
PTP
PictBridge (page 102). This setting simplifies the transfer of image
(PictBridge)
data to the connected device.
Camera turns on whenever [
pressed.
Camera turns on or off whenever [
is pressed.
Camera does not turn on or off whenever [
(PLAY) is pressed.
] (REC) or [
r
r
133
] (PLAY) is
p
] (REC) or [
] (PLAY)
p
] (REC) or [
r
] (REC) in the REC
r
Other Settings (Set Up)
]
p
Advertisement
Table of Contents
