Directing The Robot Vacuum Cleaner To The Base Station; Operating Modes; Selecting The Operating Mode - Miele HS18 Operating Instructions Manual

 Press and hold one of the direction
buttons.
The robot vacuum cleaner will travel in
the desired direction without
vacuuming.
You cannot direct the robot vacuum
cleaner manually to the base station in
order to recharge it.
Directing the robot vacuum cleaner
to the base station
(only possible when vacuuming was
started from the base station)
 Press the Base button on the remote
control or the Base sensor in the
control field.
The robot vacuum cleaner will travel to
the base station and recharge.

Operating modes

There are 5 operating options:
Auto
Standard vacuuming for
normally soiled flooring.
Spot Vacuuming of an area
approx. 1.8 m x 1.8 m
around the selected starting
point of the robot vacuum
cleaner.
24
Base
Directing the robot vacuum
cleaner to the base station.
Turbo
For vacuuming lightly soiled
flooring with a short
vacuuming duration.
Silent
Energy-saving vacuuming
with low noise development.

Selecting the operating mode

 Press the Power button on the
remote control.
There are 2 ways of selecting the
operating mode:
Option 1 (remote control)
 Press the Mode button repeatedly
until the symbol for the operating
mode you want lights up in the
control field.
 Press the  button to start
vacuuming.