Djm-900Srt Update Manual For Windows ® 8 - Pioneer SERATO DJ DJM-900SRT Firmware Update Manual

DJM-900SRT Update Manual for Windows
A. Check the unzipped file:
1. Unzip the downloaded file
Right click the downloaded file, and select "Extract All" from the menu to unzip the file.
Specify a location to unzip the downloaded file to.
2. Check the unzipped file
When the zip file is unzipped, the "DJM900SRT_Vxxx_Win" folder is generated.
Please ensure the following files are included in the folder.
1. DJM900SRT_vxxx.exe
xxx is the version of the new firmware.
Extension (.exe) might not be shown depending on your computer settings.
B. Setup DJM-900SRT for updating:
Connect the LAN cable to the LINK port on the rear panel of your DJM-900SRT.
®
8
<STEP1> While holding [CUE (BEAT EFFECT)] and
[ON/OFF (BEAT EFFECT)] buttons, press the Power
button to go into update mode.
<STEP2> Please check the current version of
your firmware by checking the "current version" on the
VFD display.
(If current version, x.xx is displayed, you do not need
to continue the update process.
The latest firmware has already been installed.)
<STEP3> Connect your computer to DJM-900SRT
using a LAN cable.
- 3 -