Cisco DECT 6800 Quick Start Manual page 2

Can't Set Up a Repeater – LED is Red
Problem
The repeater LED is red and registration of fails.
Cause
The repeater is not in registration mode.
Solution
Reset the repeater with one of these options:
Unplug the repeater. Wait 30 seconds, and then plug the repeater in again.
•
Press and hold the reset button on the bottom edge of the repeater for 5 seconds.
•
CONTACT US: USA +1 (866) 588.5885 UK +44 (0) 207 173 6900
| |
sales@masergy.com