Table of Contents
Advertisement
1. Make a second call. The first call will be put on
hold automatically.
2. Select
Conference Call
two calls will be combined and a conference
call is established.
During the multi-party call, you can answer a new
incoming call or add a new member to the call by
dialing the new member (the ongoing multi-party
call will be put on hold automatically). Once the call
is established, select
Establish conference call
the call menu to add the new member to the multi-
party call (you can add up to five members).
If you wish to separate one member from the call,
you can select
Split conference call
party call. To disconnect a member from the call,
select
End call in
conference.
Answer a second call (Network
dependent)
If you have activated
Call waiting
on your phone), you will be alerted when there is a
second incoming call. You can:
1. Press ( to answer the second call. The
current call will be put on hold automatically.
14
from the call menu. The
from
during the multi-
(enabled by default
2. Press ) to reject the second call and continue
with your current call.
3. When there is one active call and one call on
hold, you can press ,
carry out the following operations:
• Conference call
• Call transfer
• Mute
• Record
• End calls
• View contacts
If you press the numeric keys, the notepad
editor will be opened under call waiting mode.
Contact Picture
This feature allows you to link a contact in your
phonebook to a photo you have taken using the
camera function, or a picture you have downloaded
via WAP or data cable. During a call, if the other
party's name card is linked to a picture, the
incoming
call
background
corresponding picture. This feature is referred to
as
Contact
picture.
Contact picture shall be a photo or picture on the
phone memory. The photo size should not be
larger than 176 x 220 pixels.
or L
Swap
Options
to
• Handsfree
• End all calls
• Menu
will
display
the
Calling
Advertisement
Table of Contents
