Craftsman CMXBHBB17004 Instruction Manual page 4

CAUTION:
• Adequate re extinguishing material should be readily available.
• Always ensure that the mesh cover is secured over re bowl while in use.
• Burn only seasoned hard wood or re logs in the re pit.
• DO NOT attempt to move the re pit while it is hot or in use .
• DO NOT use gasoline or kerosene to start the re in your re pit.
• DO NOT use this outdoor re pit under any overhead or near any unprotected combustible constructions. Avoid
using near or under overhanging trees and shrubs. DO NOT use this unit on long or dry grass and/or leaves.
• Always use this outdoor re pit on a hard, level, non-combustible surface such as concrete, rock or stone. An
asphalt or blacktop surface may not be acceptable for this purpose. DO NOT use on wooden decks.
• Place the re pit no closer than 10 feet / 3.05 meters from walls or combustibles during use.
• Use heat-resistant gloves to handle hot tools.
• Burn only 10LBs/4.55KG of wood logs in the re pit.
• Check the local bylaws before using the re pit.
• Protective gloves and long-handled tools are recommended for use with this re pit.
• Dispose of packing materials properly.
• Users should be alerted to the hazards of high surface temperatures and keep a safe distance to avoid burning or
clothing ignition.
• Never lean over the open re pit or place hands or ngers on the upper portion of an operational unit.
Preparation
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any parts is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 5 minutes
Tools Required for Assembly (not included): Phillips Screwdriver
ENGLISH
4