Table of Contents
Advertisement
2.4 Changing the Light
•
To replace the LED bulbs, disconnect the power supply before replacing
the bulb; hold and remove the light bulb cover. Remove the old bulb by
unscrewing it counterclockwise. Replace it with a new bulb (15W) by
screwing it clockwise, and make sure it is fixed in the bulb holder tightly.
Reassemble the light cover and reconnect your freezer to the power supply.
2.5 Starting to use
•
The refrigerator must stand upright for two hours before connecting power
when it is first started.
•
Run the refrigerator for 2 to 3 hours, or 4+ hours in the summer, before
loading fresh or frozen food.
2.6 Energy Saving Tips
•
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Food that
freeze too slowly may lose quality, or spoil.
•
Be sure to wrap food properly, and wipe containers dry before placing them
in the appliance to cut down frost build-up inside the appliance.
•
Do not line storage bin with aluminum foil, wax paper, or paper towels.
Liners interfere with cold air circulation, making the appliance less efficient.
•
Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon
as possible.
9
Advertisement
Table of Contents
