Table of Contents
Advertisement
Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Camera turns on whenever [
Power On
pressed.
Camera turns on or off whenever [
Power On/Off
pressed.
Camera does not turn on or off when [
Disable
is pressed.
• With "Power On/Off", the camera turns off when you press [
mode or [
] (PLAY) in the PLAY mode.
p
• Change this setting to "Power On" or "Power On/Off" before connecting to a TV for
image viewing.
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 132,
141). With this setting, the computer sees the camera as an
Mass Storage
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
Select this setting when connecting to a printer that supports
PTP
PictBridge (page 122). This setting simplifies the transfer of image
(PictBridge)
data to the connected device.
] (REC) or [
r
] (REC) or [
r
r
156
] (PLAY) is
p
] (PLAY) is
p
] (REC) or [
] (PLAY)
p
] (REC) in the REC
r
Other Settings (Set Up)
Hide quick links:
Advertisement
Table of Contents
