Com6 Pin 9 Function Selection (Jp3); Auto Power Button Enable/Disable Selection (Jp4); Lvds Port Backlight Brightness Control Mode Selection (Jp5) - Asus Aaeon PCM-CFS User Manual

2.3.3

COM6 Pin 9 Function Selection (JP3)

+12V
2.3.4

Auto Power Button Enable/Disable Selection (JP4)

Disable/ATX (Default)
Note: When "Disable" is selected (JP4 pins 1-2), the power button is required to power
on the system. Front Panel (JP9) needs to be set to pins 1-2 to use power button.
2.3.5

LVDS Port Backlight Brightness Control Mode Selection (JP5)

Port 1
VR Mode (Default)
Port 2
VR Mode (Default)
Note: To avoid damage to components, do not use any other configuration for JP5
than those shown above!
Chapter 2 – Hardware Information
Ring (Default) +5V
Enable/AT
PWM Mode
PWM Mode
9