Page 71
知的財産権について (続き) 事していないお客様により符号化されたAVCビデオ、および/ 動画の撮影/再生の技術には 「MPEG-4」 が使われています。 またはAVCビデオを提供することについてライセンス許諾され This product is licensed under the MPEG-4 Visual Patent ているビデオプロバイダーから入手したAVCビデオに限りま Portfolio License for the personal and non-commercial す) を復号するライセンスが許諾されております。 その他の使用 use of a consumer to (i) encode video in compliance については、黙示的にも一切のライセンス許諾がされておりま with the MPEG-4 Video Standard ("MPEG-4 Video") せん。 さらに詳しい情報については、 MPEG LA, L.L.C.から入手 and/or (ii) decode MPEG-4 Video that was encoded by できる可能性があります。 http://www.mpegla.com をご参 a consumer engaged in a personal and noncommercial 照ください。 activity and/or was obtained from a licensed video 本製品は、 VC-1 Patent Portfolio Licenseに基づき、お客様が provider. No license is granted or implied for any other 個人的に、 且つ非商業的な使用のために (ⅰ) VC-1規格準拠のビ use. デオ (以下 「VC-1ビデオ」 と記載します) を符号化するライセン Additional information may be obtained from MPEG LA.
Page 72
® QRコードは株式会社デンソーウェーブの登録商標です。 Bluetooth is a trademark of the Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp microSD, microSDHCロゴはSD-3C, LLCの商標です。 is under license. Other trademarks and trade names are aptXはCSR plc.の登録商標です。 those of their respective owners. ® Bluetooth は、 米国Bluetooth SIG,Inc.の登録商標です。 この製品では、シャープ株式会社が液晶画面で見やすく、読みや すくなるよう設計したLCフォントが搭載されています。 LCフォン AOSS™は株式会社バッファローの商標です。 ト/LCFONTおよび は、 シャープ株式会社の登録商標です。 「Mobage」 は、 株式会社ディー・エヌ・エーの登録商標または 商標です。 OracleとJavaは、 Oracle Corporation及びその子会社、関連会 社の米国及びその他の国における登録商標です。 文中の社名、 商 品名等は各社の商標または登録商標である場合があります。 FeliCaはソニー株式会社が開発した非接触ICカードの技術方式 です。 FeliCaはソニー株式会社の登録商標です。 = は、 フェリカネットワークス株式会社の登録商標です。 付...
Page 73
知的財産権について (続き) 本製品は、 無線LAN標準規格のIEEE802.11に基づき、 無線LAN Google 、 Google ロゴ、 Android™、 Android ロゴ、 Google 機器の相互接続性を保証するためにWi-Fi Alliance ® が定めてい Play、 Google Play ロゴ、 Android マーケットロゴ、 Google+™、 る認証テストをパスしており、 「 Wi-Fi CERTIFIED™」 という認 Google+ ロゴ、 Gmail、 Gmail ロゴ、 Google マップ™、 Google 定が与えられています。 マップ ロゴ、 Google トーク™、 Google トーク ロゴ、 Google マップ ナビ™、...
Quick Tips AC 100 V Outlet Before Using Handset External Charge handset before powering on for the first time Device Port (not adequately charged at time of purchase). Blades . Handset may not power on when charge is low. AC . If handset does not power on even after charging, contact Charger WILLCOM Service Center or Sharp Customer Assistance Notification Lamp Center. Micro USB Plug Accessories . SD/USIM Card Insertion/Removal Tool (complimentary Insert Micro USB plug into External Device sample) Port . microSD Card (complimentary sample, preinstalled) (Battery is built into handset; handset back cover is not removable.) Charging External Device Port AC Charger is not included in the package; purchase Micro USB Plug WILLCOM AC Charger 01 (AC01-MU-K) separately. . AC Charger is not water proof. Never charge handset while ...
Page 80
Handset Keys Rotate blades out as shown, then plug AC Charger into AC outlet Activate/cancel Screen lock. Long Press for power on or phone options. Decrease Volume. Increase Volume. Return to each . Notification Lamp illuminates while charging. sheet. Long Press . Notification Lamp goes out when charge is full. to activate Camera. Unplug AC Charger and retract blades Navigation Bar Return to previous screen. Return to each sheet. Open Options menu. 付 Open application 録 Remove Micro USB plug from External usage history. Device Port . In each sheet, Phone, Mail, and Browser can be activated by Tapping corresponding icon ( , , ). 4-31...
Page 81
Screen Lock CE Declaration of Conformity After a period of inactivity or Pressing , Display goes completely dark and Screen lock activates. To cancel, Press ; lock screen appears. ■Power Off Hereby, Sharp Telecommunications of Europe Ltd, declares (Long Press) Z Power off Z OK that WX04SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity for each English Interface model can be found at the following Internet address: http://www.sharp.co.jp/k-tai/ In application sheet, (設定) Z その他の設定 Z 言語と文字入力 Z 言語 (Language) を選択 Z ...
Page 82
■Battery Cautions the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/k g and the highest SAR value Use specified AC Charger only. for this device when tested at the ear was 0.528 W/k g *. Non-specified equipment use may cause Internal Battery As mobile devices offer a range of functions, they can be to leak, overheat, burst or ignite, and may cause AC used in other positions, such as on the body as described Charger to overheat, ignite, malfunction, etc. in this User Guide**. In this case, the highest tested SAR value is 0.275 W/k g ***. As SAR is measured utilizing Battery is built into handset. Do not dispose of handset the device's highest transmitting power the actual SAR with ordinary refuse; take it to a WILLCOM Plaza/ of this device while operating is typically below that WILLCOM Counter for appropriate disposal. indicated above. This is due to automatic changes to Charge handset in ambient temperature 5 C - 35 C; the power level of the device to ensure it only uses the Internal Battery may leak/overheat and performance minimum level required to reach the network. may deteriorate outside this range. The World Health Organization has stated that present ■Mobile Light scientific information does not indicate the need for any special precautions for the use of mobile devices. They Do not shine Mobile Light in eyes. note that if you want to reduce your exposure then you May temporarily affect eyesight or startle, leading to ...
Page 83
Quick Tips (Continued) October 2011 by the Information and Communications However, there is no guarantee that interference will Council. not occur in a particular installation; if this equipment does cause harmful interference to radio or television World Health Organization reception, which can be determined by turning the http://www.who.int/emf equipment off and on, the user is encouraged to try to correct the interference by one or more of the following ■Headphone Signal Level measures: The maximum output voltage for Music Player function, 1. Reorient/relocate the receiving antenna. measured in accordance with EN 50332-2, is 12.0 mV. 2. Increase the separation between the equipment and FCC Notice receiver. 3. Connect the equipment into an outlet on a circuit . This device complies with part 15 of the FCC Rules. different from that to which the receiver is connected. Operation is subject to the following two conditions: 4. Consult the dealer or an experienced radio/TV technician (1) This device may not cause harmful interference, and (2) for help. this device must accept any interference received, including ■FCC RF Exposure Information interference that may cause undesired operation. . Changes or modifications not expressly approved by the Your handset is a radio transmitter and receiver.
Page 84
unit of measurement known as the Specific Absorption Additional information on Specific Absorption Rates Rate, or SAR. The SAR limit set by the FCC is 1.6 W/k g . (SAR) can be found on the FCC website at The tests are performed in positions and locations (e.g. http://transition.fcc.gov/oet/rfsafety/. worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when worn on the body in a holder or carry case, is < 0.10 W/k g . Body-worn Operation; This device was tested for typical body-worn operations with the back of the handset kept 15 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 15 mm separation distance between the user's body and the back of the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission 付 guidelines. SAR information on this model handset is on 録 file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/ after searching on FCC ID APYHRO00195. 4-35...
Page 85
Quick Tips (Continued) Customer Service ◆Handset Operations◆ ◆WILLCOM Services◆ ■Sharp Corporation ■WILLCOM Service Center Customer Assistance Center ●General Information 0120-606-512 From a WILLCOM handset, dial at 151 *May not be accessible from some IP phones. (charges apply) Business hours: 9:00 AM to 6:00 PM, Monday *"Dare To Demo Teigaku" free call plan applies. through Friday From another carrier's mobile phone, landline, (Excluding national holidays, New Year holidays and etc., dial at 0570-039-151 (charges apply) other company holidays) Operators available 9:00 AM to 8:00 PM, 7 ◆Repairs of Handsets◆ days a week ■Sharp Corporation ●Services Communication Systems Group From a WILLCOM handset, dial toll free at 116 Mobile Telecommunication Services Business ...