Buffalo DF626 Instruction Manual page 3

• BUFFALO recommends that
this appliance should be
periodically tested (at least
annually) by a Competent
Person. Testing should
include, but not be limited
to: Visual Inspection, Polarity
Test, Earth Continuity,
Insulation Continuity and
Functional Testing.
• BUFFALO recommend that
this product is connected
to a circuit protected by an
appropriate RCD (Residual
Current Device).
Introduction
Please take a few moments to carefully read
through this manual. Correct maintenance and
operation of this machine will provide the best
possible performance from your BUFFALO product.
Pack Contents
The following is included:
• Food warmer upper frame
• Middle frame
• Base frame
• Lamp x 2
• Instruction Manual
Troubleshooting
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Lamp expired
DF626_ML_A5_v1_20201026.indb 3 DF626_ML_A5_v1_20201026.indb 3
Probable Cause
Check the unit is plugged in correctly and switched on
Call BUFFALO agent or qualified Technician
Replace the fuse
Check power supply
Call BUFFALO agent or qualified technician
Replace lamp, part number DE164
BUFFALO prides itself on quality and service,
ensuring that at the time of packaging the contents
are supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your BUFFALO dealer immediately.
Installation
1. Remove all packaging from the appliance.
2. Position the base of the appliance on a suitable
location.
3. Slot the middle frame onto the base and
fix it at the desired height using the screws
supplied.
4. Slot the upper frame onto the middle frame
and fix using the screws supplied.
5. Mount the 2 lamps (supplied) in place.
Note:
Ensure that all packaging has been
•
removed from around the lamp.
• Ensure to use the metal clip on the base to
manage the power cord.
Operation
• Turn the appliance On/Off using the power
switch on the stem of the appliance.
Note: The appliance only
maintains temperature, it does
NOT continue to cook food.
Cleaning, Care &
Maintenance
• A BUFFALO dealer or qualified technician
should carry out repairs if required.
• Always switch off the appliance, disconnect the
power supply and allow to cool before cleaning
or performing maintenance.
Solution
UK
3
2020/10/26 16:24 2020/10/26 16:24