Table of Contents
Advertisement
10.
In the case of a long board, slide the bracket to fasten the other edge of the board.
11.
Install the top cover to the PCI module.
12.
Install the PCI module.
Do not close the release levers yet.
13.
Connect the network cable and option cables.
14.
Close the release levers.
The installed PCI module will start automatically.
15.
Secure the release levers with the setscrews.
16.
Check the PCI module status LED and PCI board status LED.
For description of LED indications, see "LEDs" in Chapter 2 and "Setup of Optional PCI
Board" later in this chapter.
Screw
Bends for fastening
boards
System Upgrade
8-37
Advertisement
Table of Contents
